David Rosen

Professor

Research Areas:
Mechanical Engineering

Pillar / Cluster: Engineering Product Development

Biography

David Rosen is a Professor in the Engineering Product Development (EPD) Pillar and is a co-Director of the Digital Manufacturing and Design (DManD) research centre. Prior to joining SUTD, he was a Professor and Associate Chair for Administration in the School of Mechanical Engineering at the Georgia Institute of Technology, where he served as Director of the Rapid Prototyping & Manufacturing Institute.  He received his Ph.D. at the University of Massachusetts in 1992 in mechanical engineering.  His research interests include computer-aided design, additive manufacturing, and design methodology.  He has industry experience, working as a software engineer at Computervision Corp. and a Visiting Research Scientist at Ford Research Laboratories.  He is a Fellow of ASME and has served on the ASME Computers and Information in Engineering Division Executive Committee.  He is the recipient of the 2013 Solid Freeform Fabrication Symposium, International Freeform and Additive Manufacturing Excellence (FAME) Award and the co-author of a leading textbook in the area.

Education

  • Ph.D. Mechanical Engineering, University of Massachusetts, 1992
  • M.S. Mechanical Engineering, University of Minnesota, 1987
  • B.ME. Mechanical Engineering, University of Minnesota, 1985

Research Interests

Most of my research activities involve additive manufacturing. Within this area, my research program is split into two parts: design for AM, and AM processes and materials. In the design for AM area, my research objective is to develop design methods and tools that enable engineering designers to take advantage of the unique capabilities of AM, including geometric complexity, multiple materials, and multi-functionality. Previous research involved the development of conformal lattice structure design methods, heuristic optimization methods for lattice structures that achieved lightweight, stiff structures, and new computer-aided design (CAD) technologies that enable integration of material information with part geometric models. The lattice structure design research was commercialized as a plug-in software module to CAD systems. I am particularly interested in researching new methods for synthesizing multi-functional, multi-material devices that extend topology optimization and evolutionary programming technologies.

In the AM process and materials areas, I focus on polymer processing with the objective of developing high precision processes that can scale to production capabilities. My work includes stereolithography, ink-jet printing, and material extrusion (fused deposition modeling) processes. In the stereolithography area, we are developing an interferometry-based real-time sensing and control technology to improve the precision of micro-optic component fabrication. The ink-jet printing project involves the development of a new type of printing head that can deposit high viscosity fluids at high speed. In the material extrusion area, two projects are underway to develop new composite materials that offer improved mechanical properties across wide ranges of end-use conditions.

In addition, I have interests in product family design research with an emphasis on synthesis methods for product configurations.

Underlying much of the design work is an interest in knowledge modeling to capture the rich structure of engineering information, knowledge, and know-how. Extensive knowledge bases are being constructed for AM and design for AM. Early research is underway in applying knowledge modeling to product family design methods as well.

Professional Positions

  • 2015-2016, Visiting Professor, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore.
  • 2009-2016, Associate Chair for Administration, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  • 2007-2009, Associate Chair for Graduate Studies, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  • 2005-2011, Visiting Professor, Dept. of Mechanical and Manufacturing Engr., Loughborough University, UK.
  • 2004-2016, Morris M. Bryan, Jr. Professor (2015-2016), Professor (2004-2015), George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  • 1998-2004, Associate Professor, George W. Woodruff School of Mechanical Engineering.
  • 1992-1998, Assistant Professor, George W. Woodruff School of Mechanical Engineering.
  • 1990, Visiting Research Scientist, Ford Scientific Research Laboratory, Ford Motor Co., Dearborn, MI.
  • 1987-1989, Software Engineer, Computervision and Prime Computer, Bedford, MA.

Awards

  • Best Paper Award, International Conference on Progress in Additive Manufacturing, Singapore, May 26-28, 2014.
  • Solid Freeform Fabrication Symposium, International Freeform and Additive Manufacturing Excellence (FAME) Award, 2013.
  • Outstanding Presentation Award, Solid Freeform Fabrication Symposium, 2013.
  • ASME Computers and Information in Engineering Division Excellence in Research Award, 2012.
  • Best Paper Award, Int’l Conference on MicroManufacturing, Chicago, March 12-14, 2012.
  • Best Paper Award, Virtual and Rapid Prototyping Conference, Leiria, Portugal, Sept 28 – Oct 1, 2011.
  • Outstanding Paper Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 9-11, 2010.
  • Best Paper Award, ASME Computers & Information in Engineering Conference. Authors: G.C. Graf, J. Chu, S. Engelbrecht, D.W. Rosen, 2009.
  • First Place, Selective Laser Sintering Excellence Award, 3D Systems User Group Conference, Daytona Beach, FL, March 15-19, 2009.
  • Best Paper Award, ASME Design for Manufacturing and Life Cycle Conference, 2008. Authors: C.B. Williams, F. Mistree, D.W. Rosen.
  • Outstanding Paper Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2008.
  • Best Presentation Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007.
  • Outstanding Paper Award, Solid Freeform Fabrication Symposium, 2005.
  • Best Paper Award, ASME CIE Conference, 2005.
  • Fellow, American Society of Mechanical Engineers, 2003.
  • Highly Commended Award (awarded by the Literati Club of MCB Press) for paper IV.B.15, published in the Rapid Prototyping Journal, 1999.
  • Engineer of the Year in Education, Society of Professional Engineers, Metro Atlanta Section, 1997.
  • Distinguished Paper Award in ASME Design Theory and Methodology Conference, August 1996.
  • Best Paper Award in the Artificial Intelligence and Expert Systems section at the ASME Computers in Engineering Conference, August 1992.

Publications

Professor Rosen has published a leading textbook in the additive manufacturing area, about 90 journal articles, over 150 refereed conference papers, and over 100 other conference presentations. He has an h-index of 38 (Google Scholar) with over 6000 citations.

Books

  • Gibson, I, Rosen, D.W., Stucker, B., Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, 2010. ISBN: 978-1-4419-1119-3.
  • Gibson, I, Rosen, D.W., Stucker, B., Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Second Edition, Springer, 2015. ISBN: 978-1-4939-2113-3.

Edited Volumes

  • Michopoulos, J., Paredis, C.C., Rosen, D.W., Vance, J., Editors, Advances in Computers and Information in Engineering Research, ASME Press, 2014. ISBN-13: 978-0791860328

Recent Journal Articles

  • Zhao, X., Rosen, D.W., “Simulation Study on Evolutionary Cycle to Cycle Time Control of Exposure Controlled Projection Lithography,” Rapid Prototyping Journal, 22(3), 2016.
  • Park, S-I., Rosen, D.W., Quantifying Effects of Material Extrusion Additive Manufacturing Process on Mechanical Properties of Lattice Structures Using As-Fabricated Voxel Modeling, Additive Manufacturing, 2016. doi: 10.1016/j.addma.2016.05.006
  • Wu, D., Rosen, D.W., Wang, L., Schaefer, D., “Cloud-Based Design and Manufacturing: A New Paradigm in Design Innovation and Digital Manufacturing,” Computer-Aided Design, Vol. 59, pp. 1-14, 2015. doi:10.1016/j.cad.2014.07.006
  • Choi, S.-K., Gorguluarslan, R., Park, S.-I., Stone, T., Moon, J.K., Rosen, D.W., “Simulation-based Uncertainty Quantification for Additively Manufactured Cellular Structures,” Journal of Electronic Materials, Vol. 44, No. 10, pp 4035-4041, 2015. DOI: 10.1007/s11664-015-3841-2
  • Wu, D., Rosen, D.W., Schaefer, D., “Scalability Planning for Cloud-Based Manufacturing Systems,” ASME J. Manufacturing Science and Engineering, Vol. 137, paper 041007, 2015.
  • Gorguluarslan, R., Park, S-I, Rosen, D.W., Choi, S-K., “A Multi-Level Upscaling Method for Material Characterization of Additively Manufactured Part Under Uncertainties,” ASME J. of Mechanical Design, Vol. 137, No. 11, paper 111408, 2015. doi:10.1115/1.4031012.
  • Wu, D., Rosen, D.W., Panchal, J., Schaefer, D., “Understanding Communication and Collaboration in Social Product Development through Social Network Analysis,” ASME J. Computing & Information Science & Engineering, accepted 10/2015.
  • Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Shape Evolution of Multiple Droplet Interaction in Inkjet Deposition,” Rapid Prototyping Journal, Vol. 21, No. 4, pp , 2015.
  • Jeong, N., Rosen, D.W., “Reverse Engineering of Materials using Surfacelet-based Methods for CAD-Material Integration,” ASME Manufacturing Science and Engineering, Vol. 136, December, 2014, paper 061021.
  • Rosen, D.W., “Research Supporting Principles for Design for Additive Manufacturing,” Virtual and Physical Prototyping, Vol. 9, No. 4, pp. 225-232, 2014. DOI: 10.1080/17452759.2014.949406
  • Huang, W., Rosen, D.W., Wang, Y., “Inverse Surfacelet Transform for Image Reconstruction with Prior Knowledge,” ASME J. Computing and Information Science in Engineering, Vol. 14, No. 2, paper 021005, June 2014.
  • Bourell, D.L., Rosen, D.W., Leu, M.C., “The Roadmap for Additive Manufacturing and Its Impact,” 3D Printing and Additive Manufacturing, Vol. 1, No. 1, pg. 6-9, 2014.
  • Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Lattice Boltzmann Simulations of Multiple Droplet Interaction Dynamics,” Physical Review E, Vol. 89, paper 033311, March 2014. doi: 10.1103/PhysRevE.89.033311.
  • Rosen, D.W., “Multi-Scale, Heterogeneous CAD Representation for Metal Alloy Microstructures,” ASME Journal of Computing & Information Science in Engineering, Vol. 14, No. 4, 2014, paper 041003.
  • Park, S-I, Rosen, D.W., Choi, S-K., Duty, C.E., “Effective Mechanical Properties of Lattice Material Fabricated by Material Extrusion Additive Manufacturing,” Additive Manufacturing, Vol. 1-4, No. 1, pp. 12-23, 2014.
  • Schwerzel, R.E., Jariwala, A.S., Rosen, D.W., “A Simple, Inexpensive, Real-Time Interferometric Cure Monitoring System for Optically Cured Polymers,” J. Applied Polymer Science, Vol. 129, No. 5, pp 2653-2662, 2013, DOI: 10.1002/APP.38993.
  • Rosen, DW, Jeong, N, Wang, Y, “A Method for Reverse Engineering of Material Microstructure for Heterogeneous CAD,” Computer-Aided Design, Vol. 45, No. 7, pp. 1068-1078, 2013, doi:10.1016/j.cad.2013.01.004.
  • Mathai, G., Rosen, D.W., Melkote, S., Olsen, T.W., “Tissue Translocation Device for Surgical Correction of Age-related Macular Degeneration,” ASME J. of Medical Devices, Vol. 7, No. 4, pp. 1-8, 2013.
  • Mathai, G., Melkote, S.N., Rosen, DW, “Effect of Process Parameters on Burrs Produced in Micromilling of a Thin Nitinol Foil,” ASME J. Micro and Nano Manufacturing, vol. 1, No. 2, paper 021005, 2013.
  • Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “What Controls Dynamics of Droplet Shape Evolution upon Impingement on a Solid Surface?” AIChE, Vol. 59, No. 8, pp. 3071-3082, 2013.
  • Wu, D., Greer, M.J., Rosen, D.W., Schaefer, D., “Cloud Manufacturing: Strategic Vision and State-of-the-Art,” J. Manufacturing Systems, Vol. 32, No. 4, pp. 564-579, 2013.
  • Nguyen, J., Park, S-I., Rosen, DW, “Heuristic Optimization Method for Cellular Structure Design of Light Weight Components,” Int’l J. Precision Engineering and Manufacturing, Vol. 14, No. 6, pp. 1071-1078, 2013.
  • Mathai, G., Melkote, S.N., Rosen, DW, “Material Removal during Abrasive Impregnated Brush Deburring of Micromilled Grooves in NiTi Foils,” Int’l J. Machine Tools and Manufacture, Vol. 72, pp. 37-49, 2013.
  • Wu, D., Thames. J.L., Rosen, D., Schaefer, D., “Enhancing the Product Realization Process with Cloud-based Design and Manufacturing Systems.” ASME Journal of Computing & Information Sciences in Engineering (JCISE), Vol. 13, paper 041004, Dec. 2013.
  • Chang, P.S., Rosen, D.W., “The Size Matching and Scaling Method: A Synthesis Method for the Design of Mesoscale Cellular Structures,” Int’l J. Computer Integrated Manufacturing, Vol. 26, Issue 10, pp. 907-927, 2012.
  • Zhou, W., Loney, D., Degertekin, F.L., Fedorov, A.G., Rosen, D.W., “Droplet Impact Dynamics in Ink-Jet Printing,” Virtual and Physical Prototyping, Vol. 7, No. 1, pp. 49-64, 2012.
  • Wu, W, Zhao, J, Zhang, L, Feng, N, Rosen, DW, “Customized Titanium Plate Virtual Design and Deformation Simulation Analysis of Human Lateral Mandible Defect,” Applied Mechanics and Materials, Vol. 157-158, pp. 227-230, 2012.
  • Schaefer, D., Thames, J.L, Wellman, R., Wu, D., Yim, S., Rosen, D., “Distributed Collaborative Design and Manufacture in the Cloud – Motivation, Infrastructure, and Education,” ASEE Computers in Education Journal (CoED), Vol. 3, No. 4, October-December 2012, pp. 1-16.
  • Williams, C.B., Cochran, J.K., Rosen, D.W., “Additive Manufacturing of Metallic Cellular Materials via Three-Dimensional Printing,” Int’l J of Advanced Manufacturing Technology, Vol. 53, No. 1-4, pp. 231-239, 2011.
  • Jariwala, A.S., Ding, F., Boddapati, A., Breedveld, V., Grover, M., Henderson, C., Rosen, D.W., “Modeling Effects of Oxygen Inhibition in Mask based Stereolithography,” Rapid Prototyping Journal, Vol. 17, No. 3, pp 168-175, 2011.
  • Williams, C.B., Mistree, F., Rosen, D.W., “A Functional Classification Framework for the Conceptual Design of Additive Manufacturing Technologies,” ASME J. of Mechanical Design, Vol. 133, No. 12, paper 121002, Dec. 2011.
  • Kang, J., Scholz, T., Ku, D.N., Rosen, D.W., “Pump Design for a Portable Renal Replacement System,” ASME J. of Medical Devices, Vol. 5, paper 031008, 2011.
  • Chu, C., Engelbrecht, S., Graf, G.C., Rosen, D.W., “A Comparison of Synthesis Methods for Cellular Structures with Application to Additive Manufacturing,” Rapid Prototyping Journal, Vol. 16, No. 4, pp. 275-283, 2010.
  • Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “The Effects of Biological Examples in Idea Generation,” Design Studies, Vol. 31, Issue 2, pp. 169-186, 2010.
  • Meacham, JM, O’Rourke, A, Yang, Y, Fedorov, AG, Degertekin, FL, Rosen, DW, “Experimental Characterization of High Viscosity Droplet Ejection,” ASME Manufacturing Science and Engineering, Vol. 132, No. 3, paper #030905, June 2010.
  • Wang, Y., Rosen, D.W., “Multiscale Heterogeneous Modeling with Surfacelets,” Computer-Aided Design & Applications, Vol. 7, No. 5, 759-776, 2010.
  • Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “Refined Metrics for Measuring Ideation Effectiveness,” Design Studies, Vol. 30, pp 737-743, 2009.

Recent Refereed Conference Papers

  • Kelley, M., Rosen, D.W., “Reconfigurable User Interfaces for CAD Applications,” ASME Computers and Information in Engineering Conference, paper IDETC2016-60202, Charlotte, NC, Aug. 21-24, 2016.
  • Dinar, M., Rosen, D.W., “An Ontology for Design for Additive Manufacturing,” ASME Computers and Information in Engineering Conference, paper IDETC2016-60196, Charlotte, NC, Aug. 21-24, 2016.
  • Park, S-I., Rosen, D.W., “Homogenization of Mechanical Properties for Additively Manufactured Periodic Lattice Structure Considering Joints Stiffening Effects,” ASME Computers and Information in Engineering Conference, paper IDETC2016-59730, Charlotte, NC, Aug. 21-24, 2016.
  • Zhao, X., Rosen, D.W., “Process Modeling and Advanced Control Methods for Exposure Controlled Projection Lithography,” American Control Conference, Chicago, July 1-3, 2015.
  • Lei, N., Moon, S.K., Rosen, D.W., “Redefining Product Family Design for Additive Manufacturing,” International Conference on Engineering Design, Milan, Italy, July 27-30, 2015.
  • Rosen, D.W., “A Set-Based Design Method for Material-Geometry Structures by Design Space Mapping,” ASME Design Automation Conference, paper DETC2015-46760, Boston, Aug. 2-5, 2015.
  • Gorguluarslan, R., Park, S-I., Rosen, D.W., Choi, S-K., “Material Characterization via a Multi-Level Stochastic Upscaling Technique, ASME Design Automation Conference, paper DETC2015-46819, Boston, Aug. 2-5, 2015.
  • Zhao, X., Rosen, D.W., “Parameter Estimation Based Real-Time Metrology for Exposure Controlled Projection Lithography,” Solid Freeform Fabrication Symposium, Aug. 10-12, 2015.
  • Park, S-I., Rosen, D.W., “Quantifying Mechanical Property Degradation of Cellular Material using As-Fabricated Voxel Modeling for the Material Extrusion Process,” Solid Freeform Fabrication Symposium, Aug. 10-12, 2015.
  • Rosen, D.W., “What are Principles of Design for Additive Manufacturing?” Int’l Conf on Progress in Additive Manufacturing, Singapore, May 26-28, 2014. Best paper award.
  • Jariwala, A., Vaish, S., Rosen, D.W., “Enabling Institute-wide Multidisciplinary Engineering Capstone Design Experiences,” ASEE Summer Conference, 2014.
  • Wu, D., Rosen, D.W., Wang, L., & Schaefer, D., “Cloud-Based Manufacturing: Old Wine in New Bottles?” Proceedings of the 47th CIRP Conference on Manufacturing Systems, Windsor, Ontario, Canada, April 28-30, 2014.
  • Jones, H.H., Jariwala, A.S., Rosen, D.W., “Towards Real Time Control of Exposure Controlled Projection Lithography,” ASME International Symposium on Flexible Automation, Awaji-Island, Japan, July 14-16, 2014.
  • Alzahrani, M., Rosen, D.W., Choi, S.K., “Design of Truss-like Cellular Structures using Element Density Information from Homogenization Topology Optimization,” ASME Computers and Information in Engineering Conference, paper DETC2014-34566, Buffalo, NY, Aug 17-20, 2014.
  • Huang, W., Rosen, D.W, Wang, Y., “A Multi-scale Materials Design Method with Seamless Zooming Capability based on Surfacelets,” ASME Design Automation Conference, paper DETC2014-34435, Buffalo, NY, Aug 17-20, 2014.
  • Rosen, D.W., “Multi-Scale, Heterogeneous CAD Representation for Metal Alloy Microstructures,” ASME Computers and Information in Engineering Conference, paper DETC2014-34563, Buffalo, NY, Aug 17-20, 2014.
  • Park, S.I., Rosen, D.W., “Effective Mechanical Properties of Lattice Material Fabricated by Material Extrusion Additive Manufacturing,” ASME Computers and Information in Engineering Conference, paper DETC2014-34683, Buffalo, NY, Aug 17-20, 2014.
  • Mathai, G., Melkote, S., Rosen, D., “Material Removal during Abrasive Impregnated Brush Deburring of Micromilled Grooves in NiTi Foils,” Int’l Conference on MicroManufacturing, Victoria, Canada, March 25-28, 2013.
  • Wu, D., Greer, J.J., Rosen, D.W., Schaefer, D., “Cloud Based manufacturing: Drivers, Current Status, and Future Trends,” ASME Manufacturing Science and Engineering Conf., paper #MSEC2013-1106, Madison, WI, June 10-14, 2013.
  • Jeong, N., Rosen, D.W., Wang, Y., “A Comparison of Surfacelet-Based Methods for Recognizing Linear Geometric Features in Material Microstructure,” ASME Computers and Information in Engineering Conference, paper #DETC2013-13370, Portland, OR, Aug. 4-7, 2013.
  • Huang, W., Wang, Y., Rosen, D.W., “Inverse Surfacelet Transform for Image Reconstruction with Prior Knowledge,” ASME Computers and Information in Engineering Conference, paper #DETC2013-12674, Portland, OR, Aug. 4-7, 2013.
  • Wu, D., Morlock, M., Pande, P., Rosen, D.W., Schaefer, D., “Incorporating Social Product Development in Distributed Collaborative Design Education,” ASME Design Engineering Conference., paper #DETC2013-13093, Portland, OR, Aug. 4-7, 2013.
  • Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Lattice Boltzmann Simulations of Multiple Droplet Interaction Dynamics in Inkjet Deposition,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 12-14, 2013. Outstanding Presentation Award
  • Jones, H.H., Kwatra, A., Jariwala, A., Rosen, D.W., “Real-Time Selective Monitoring of Exposure Controlled Projection Lithography,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 12-14, 2013.
  • Summers, J.D., Rosen, D.W., “Mechanical Engineering Modelling Language (MEML): Requirements for Conceptual Design,” International Conference on Engineering Design, Seoul, South Korea, Aug. 19-22, 2013.
  • Wu, D., Schaefer, D., Rosen, D.W., “Cloud-Based Design and Manufacturing: A Social Network Analysis,” International Conference on Engineering Design, Seoul, South Korea, Aug. 19-22, 2013.
  • Mathai, G., Melkote, S., Rosen, D., “Effect of Machining Parameters on Burr Size of Micromilled Foils,” Int’l Conference on MicroManufacturing, Chicago, March 12-14, 2012. Best Paper Award.
  • Olsen, T.W., Mathai, G., Loftness, P., Melkote, S., Rosen, D., Erdman, A., “A novel Surgical method and Support device for Translocating Autologous Tissue Grafts to the Sub-Area Centralis: In vivo Porcine Model,” the Associate for Research in Vision and Ophthalmology (ARVO 2012), Fort Lauderdale, FL, May 6-10, 2012.
  • Schaefer, D., Thames, J.L., Wellman, R., Wu, D., Yim, S., Rosen, D, “Distributed Collaborative Design and Manufacture in the Cloud—Motivation, Infrastructure, and Education.” ASEE Annual Conference and Exposition, San Antonio, TX, June 10-13, 2012.
  • Jariwala, A., Schwerzel, R.E., Rosen, D.W., “Two Dimensional Real-Time Interferometric Monitoring System for Exposure Controlled Projection Lithography, ASME Int’l Symposium on Flexible Automation, St. Louis, MO, June 18-20, 2012.
  • Wu, D., Thames, J.L., Rosen, D.W., Schaefer, D., “Towards a Cloud-Based Design and Manufacturing Paradigm: Looking Backward, Looking Forward,” ASME Computers & Information in Engineering Conference, paper #DETC2012-70780, Chicago, August 12-15, 2012.
  • Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Shape characterization for droplet impingement dynamics in Ink-jet deposition,” ASME Computers & Information in Engineering Conference, paper #DETC2012-71026, Chicago, August 12-15, 2012.
  • Yim, S., Rosen, D.W., “Build Time and Cost Models for Additive Manufacturing Process Selection,” ASME Computers & Information in Engineering Conference, paper #DETC2012-70940, Chicago, August 12-15, 2012.
  • Hume, C., Rosen, D.W., “Identification of Platform Variables in Product Family Design using Sensitivity Analysis,” ASME Design Automation Conference, paper #DETC2012-71198, Chicago, August 12-15, 2012.
  • Rosen, D.W., Summers, J.D., “Mechanical Engineering Modeling Language (MEML): Necessary Research Directions,” Int’l Conference on Innovative Design & Manufacturing, Taipei, Taiwan, Dec. 12-14, 2012.
  • Zhou, W., Loney, D., Degertekin, F.L., Fedorov, A.G., Rosen, D.W., “Shape Evolution of Droplet Impact Dynamics in Ink-Jet Manufacturing,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 8-10, 2011.
  • Rosen, D.W., Jeong, N., Wang, Y., “A Hierarchical, Heterogeneous CAD Modeling Approach,” ASME Computers & Information in Engineering Conference, paper #DETC2011-47550, Washington, DC, Aug 29-31, 2011.
  • Yim, S., Rosen, D.W., “A Framework for Self-Realizing Process Models for Additive Manufacturing,” ASME Computers & Information in Engineering Conference, paper #DETC2011-47425, Washington, DC, Aug 29-31, 2011.
  • Chang, P.S., Rosen, D.W., “An Improved Size, Matching and Scaling Method for the Design of Deterministic Mesoscale Truss Structures,” ASME Computers & Information in Engineering Conference, paper #DETC2011-47729, Washington, DC, Aug 29-31, 2011.
  • Kang, J., Jariwala, A., Rosen, D.W., “An Empirical Model for the Prediction of Hemodialysis System Performance,” ASME IMECE, paper IMECE2011-62395, Denver, CO, Nov. 11-17, 2011.
  • Wu, W., Zhao, J., Zhang, L., Wang, W., Rosen, D.W., “Reconstruction of lateral mandible defect based on finite element analysis and rapid prototyping,”2011 International Conference on Mechatronics and Applied Mechanics, Hong Kong, Dec. 27-28, 2011.
  • Wang, Y., Rosen, D.W., “Multiscale heterogeneous Modeling with Surfacelets,” Int’l CAD Conference and Exhibition, Dubai, June 21-25, 2010.
  • Liu, X., Rosen, D.W., Yu, Z., “Ontology based Knowledge modeling and Reuse Aproach in Product Redesign,” Proceedings of the 2010 IEEE International Conference on Information Reuse and Integration, Las Vegas, NV, Aug. 4-6, 2010.
  • Jariwala, A., Ding, F., Rosen, D.W., “Process Planning for the Film Micro Stereolithography Process,” Solid Freeform Fabrication Symposium, Austin, TX, Aug 9-11, 2010.
  • Loney, D.A., Zhou, W., Degertekin, F.L., Fedorov, A.G., Rosen, D.W., “Acoustic Analysis of Viscous Fluid Ejection using Ultrasonic Atomizer,” Solid Freeform Fabrication Symposium, Austin, TX, Aug 9-11, 2010.
  • Wu, W., Chen, Y., Wang, W., Qin, X., Rosen, D.W., ”Employing Rapid Prototyping Biomedical Model to Assist the Surgical Planning of Defect Mandibular Reconstruction,” 3rd Int’l Conf. on Biomedical Engineering and Informatics, Yantai, China, Oct. 16-18, 2010.
  • Kang, J., Scholz, T., Ku, D.N., Rosen, D.W., “Pump Design for a Portable Renal Replacement System,” ASME IMECE, paper IMECE2010-38245, Nov. 12-18, 2010.
  • Chang, P.S., Rosen, D.W., “The Size Matching and Scaling Method: A Synthesis Method for the Design of Mesoscale Cellular Structures,” International Conference on Manufacturing Automation, Hong Kong, Dec. 13-15, 2010.
  • Liu, X., Rosen, D.W., “Ontology based Knowledge Modeling and Reuse Approach of Supporting Process Planning in Layer-based Additive Manufacturing,” International Conference on Manufacturing Automation, Hong Kong, Dec. 13-15, 2010.
  • Zhou, W., Wu, D., Ding, X., Rosen, D.W., “Customer Co-Design of Computer Mouse for Mass Customization without Causing Mass Confusion,” International Conference on Manufacturing Automation, Hong Kong, Dec. 13-15, 2010.